+36 1 136 9552

Gasket plate heat exchanger

With over 16 years of experience, THOMPSON HEAT TRANSFER we can troubleshoot any problems you may be experiencing with your plate type heat exchangers. We can also assist you in bringing your equipment back to its peak operating condition. If you are experiencing a decline in thermal performance or increased pressure losses, please contact us for a free consultation.

We supply Gasket  Plate Heat Exchangers for many applications, including:Boiler / Heating separation 
1. Domestic Hot Water (DHW) Heating 
2. Steam to Water Heating 
3. Heat pumps
4. Industrial process liquid heating and cooling
5. Swimming Pool Heating 
6. Chemical heating and cooling, either in-line or on a batch process
7. Heating, Ventilating & Air Conditioning (HVAC)
8. Marine - (Titanium Plates) for uses such as main engine cooling, oil cooling, intercoolers and deck wash water heating
9. Dairy - milk pasteurising, raw milk cooling
10. Food products
11. CIP wash water heating
12. Brewing - Wort cooling, beer/lager/cider conditioning
13. Pharmaceutical - Hygienic water heating / cooling
Many, many more... 

phe-service.jpg (507 KB)

Plate Material Characteristics

Material

Application

SS304

Drink water, None Corrosive Liquid, Oils, Fresh Steam etc.

SS316

Well water, river water, closed circulating water and other water with complex components, Dilute sulfuric acid with temperature ≤ 50 ℃ and concentration ≤ 10% etc.

Titanium

Liquid that contains chlorine iron, Sea water etc.

Titanium Alloy

Higher temperature and corrosion resistance than titanium.

Nickel 20

It is mainly used for caustic solution (NaOH, Koh, etc.) with high concentration (50% ~ 70%) and high temperature (boiling point).

Hastelloy C-276

It has good corrosion resistance, almost not affected by Cl -, excellent corrosion resistance to various concentrations of
sulfuric acid, and is one of the few materials that can be used in hot concentrated sulfuric acid, widely used in organic acids
(such as formic acid, acetic acid), high temperature HF acid and a certain concentration of hydrochloric acid (< 40%), phosphoric
acid (< 50%); chloride, fluoride.

 

phe-spare-part.jpg (838 KB)

Gasket Material Charactristics

Material

Working Temperature

Working Enviroment

NBR

-25~120℃

Alkane, olefin and other non-polar media, all kinds of mineral oil, animal and vegetable oil, hot water, salt water, etc。

EPDM

-50~170℃

Superheated water, steam, atmospheric ozone, non petroleum based lubricating oil, weak acid, weak base, ketone alcohol, etc

HNBR

-25~150℃

Crude oil, sulfur-containing oil and organic sulfur compounds, some heat transfer oil, new refrigerant 134a, etc

Viton

-25~150℃

Nonpolar mineral oil, high temperature water vapor, sulfuric acid, chlorine water, phosphate with concentration above 98%

 

Please contact us to inspect and get suitable design.